Library prosa.results.prm.edf.fully_nonpreemptive

RTA for Fully Non-Preemptive EDF Scheduling on Uniprocessors under the Periodic Resource Model

In the following, we derive a response-time analysis for EDF schedulers, assuming a workload of sporadic fully non-preemptive real-time tasks, characterized by arbitrary arrival curves, executing upon a uniprocessor under the periodic resource model (see "Periodic Resource Model for Compositional Real-Time Guarantees" by Shin & Lee, RTSS 2003). To this end, we instantiate the sequential variant of abstract Restricted-Supply Analysis (aRSA) as provided in the prosa.analysis.abstract.restricted_supply module.

Defining the System Model

Before any formal claims can be stated, an initial setup is needed to define the system model under consideration. To this end, we next introduce and define the following notions using Prosa's standard definitions and behavioral semantics:
  • tasks, jobs, and their parameters,
  • the task set and the task under analysis,
  • the processor model,
  • the sequence of job arrivals,
  • the absence of self-suspensions,
  • an arbitrary schedule of the task set, and finally,
  • the resource-supply model.

Tasks and Jobs

Consider tasks characterized by a WCET task_cost, relative deadline task_deadline, and an arrival curve max_arrivals, ...
... and their associated jobs, where each job has a corresponding task job_task, an execution time job_cost, and an arrival time job_arrival.
  Context {Job : JobType} `{JobTask Job Task} `{JobCost Job} `{JobArrival Job}.

Furthermore, assume that jobs and tasks are fully non-preemptive.
  #[local] Existing Instance fully_nonpreemptive_job_model.
  #[local] Existing Instance fully_nonpreemptive_task_model.
  #[local] Existing Instance fully_nonpreemptive_rtc_threshold.

Processor Model

Consider any kind of fully-supply-consuming, unit-supply processor state model.

The Task Set and the Task Under Analysis

Consider an arbitrary task set ts, and ...
  Variable ts : seq Task.

... let tsk be any task in ts that is to be analyzed.
  Variable tsk : Task.
  Hypothesis H_tsk_in_ts : tsk \in ts.

The Job Arrival Sequence

Allow for any possible arrival sequence arr_seq consistent with the parameters of the task set ts. That is, arr_seq is a valid arrival sequence in which each job's cost is upper-bounded by its task's WCET, every job stems from a task in ts, and the number of arrivals respects each task's max_arrivals bound.

Absence of Self-Suspensions

We assume the classic (i.e., Liu & Layland) model of readiness without jitter or self-suspensions, wherein pending jobs are always ready.
  #[local] Existing Instance basic_ready_instance.

The Schedule

Consider a non-preemptive, work-conserving, valid uniprocessor schedule that corresponds to the given arrival sequence arr_seq (and hence the given task set ts).
We assume that the schedule respects the given EDF scheduling policy.

Periodic Resource Model

Assume that the processor supply follows the *periodic resource model* as defined in "Periodic Resource Model for Compositional Real-Time Guarantees" by Shin & Lee (RTSS 2003). Under this model, the supply is distributed periodically with a resource period Π and a resource allocation time γ: in every interval [Π⋅k, Π⋅(k+1)), the processor provides at least γ units of supply. Furthermore, let prm_sbf Π γ denote the corresponding SBF defined in the paper, which, as proven in the same paper and verified in prosa.analysis.facts.model.sbf.periodic, is a valid SBF.

Maximum Length of a Busy Interval

In order to apply aRSA, we require a bound on the maximum busy-window length. To this end, let L be any positive solution of the busy-interval "recurrences" (i.e., set of inequalities) prm_sbf Π γ L total_request_bound_function ts L and prm_sbf Π γ L longest_busy_interval_with_pi ts tsk, as defined below.
As the lemma busy_intervals_are_bounded_rs_edf shows, under EDF scheduling, this condition is sufficient to guarantee that the maximum busy-window length is at most L, i.e., the length of any busy interval is bounded by L.

Response-Time Bound

Having established all necessary preliminaries, it is finally time to state the claimed response-time bound R.
A value R is a response-time bound for task tsk if, for any given offset A in the search space (w.r.t. the busy-window bound L), the response-time bound "recurrence" (i.e., inequality) has a solution F not exceeding A + R.
  Definition rta_recurrence_solution L R :=
     (A : duration),
      is_in_search_space ts tsk L A
       (F : duration),
        prm_sbf Π γ F blocking_bound ts tsk A
                        + (task_request_bound_function tsk (A + ε) - (task_cost tsk - ε))
                        + bound_on_athep_workload ts tsk A F
         prm_sbf Π γ (A + R) prm_sbf Π γ F + (task_cost tsk - ε)
         A + R F.

Finally, using the sequential variant of abstract restricted-supply analysis, we establish that, given a bound on the maximum busy-window length L, any such R is indeed a sound response-time bound for task tsk under fully non-preemptive EDF scheduling on a unit-speed uniprocessor under the periodic resource model.
  Theorem uniprocessor_response_time_bound_fully_nonpreemptive_edf :
     (L : duration),
      busy_window_recurrence_solution L
       (R : duration),
        rta_recurrence_solution L R
        task_response_time_bound arr_seq sched tsk R.
  Proof.
    moveL [BW_POS [BW_SOL1 BW_SOL2]] R SOL js ARRs TSKs.
    have [ZERO|POS] := posnP (job_cost js); first by rewrite /job_response_time_bound /completed_by ZERO.
    have VMBNS : valid_model_with_bounded_nonpreemptive_segments arr_seq sched
      by apply fully_nonpreemptive_model_is_valid_model_with_bounded_nonpreemptive_regions ⇒ //.
    have VBSBF : valid_busy_sbf arr_seq sched tsk (prm_sbf Π γ).
    { by apply: valid_pred_sbf_switch_predicate; last apply prm_sbf_valid. }
    have US : unit_supply_bound_function (prm_sbf Π γ) by exact: prm_sbf_unit.
    have POStsk: 0 < task_cost tsk
      by move: TSKs ⇒ /eqP <-; apply: leq_trans; [apply POS | apply H_valid_task_arrival_sequence].
    eapply uniprocessor_response_time_bound_restricted_supply_seq with (L := L) (SBF := prm_sbf Π γ) ⇒ //.
    - exact: instantiated_i_and_w_are_coherent_with_schedule.
    - exact: EDF_implies_sequential_tasks.
    - exact: instantiated_interference_and_workload_consistent_with_sequential_tasks.
    - apply: busy_intervals_are_bounded_rs_edf ⇒ //.
      by apply: instantiated_i_and_w_are_coherent_with_schedule.
    - apply: valid_pred_sbf_switch_predicate; last first.
      + by apply prm_sbf_valid.
      + by move ⇒ ? ? ? ? [? ?]; split ⇒ //.
    - apply: instantiated_task_intra_interference_is_bounded; eauto 1 ⇒ //; first last.
      + by (apply: bound_on_athep_workload_is_valid; try apply H_fixed_point) ⇒ //.
      + apply: service_inversion_is_bounded ⇒ // ⇒ jo t1 t2 ARRo TSKo BUSYo.
        by apply: nonpreemptive_segments_bounded_by_blocking ⇒ //.
    - moveA SP; move: (SOL A) ⇒ [].
      + apply: search_space_sub ⇒ //=.
        by apply: non_pathological_max_arrivals =>//; apply H_valid_task_arrival_sequence.
      + moveF [FIX1 [FIX2 FIX3]]; F; split ⇒ //; split.
        × by rewrite /task_rtct /fully_nonpreemptive_rtc_threshold /constant /task_intra_IBF; lia.
        × by rewrite /task_rtct /fully_nonpreemptive_rtc_threshold /constant; lia.
  Qed.

End RTAforFullyNonPreemptiveEDFModelwithArrivalCurves.